Author |
Message |
sivaranjini govindan (granjinig)
Junior Member Username: granjinig
Post Number: 3 Registered: 04-2005
| Posted on Monday, May 09, 2005 - 12:29 pm: | |
I want to adjust the X and Y coordinates, to view the outputs clearly........how can i do this?
|
Robert G. Nelson (rgnelson)
Moderator Username: rgnelson
Post Number: 356 Registered: 06-2003
| Posted on Monday, May 09, 2005 - 03:32 pm: | |
You'll have to give a little more information. I don't know what you are talking about. |
sivaranjini govindan (granjinig)
Member Username: granjinig
Post Number: 4 Registered: 04-2005
| Posted on Monday, May 09, 2005 - 04:37 pm: | |
when plotting a geometry of 1e-9 x 100e-9, i am getting a, contor plot for heat transfer, very small y-axis domain. in that which i can not see the variations of heat transfer. the y-axis at present scale is e-4, i want to make it e-9, how can i do this? |
Robert G. Nelson (rgnelson)
Moderator Username: rgnelson
Post Number: 357 Registered: 06-2003
| Posted on Monday, May 09, 2005 - 09:41 pm: | |
FlexPDE normally tries to present plots with true dimensions. But if you use ZOOM, the dimensions of the ZOOM box will be expanded to fill the square area available to the plot. Simply append ZOOM(xorigin,yorigin, xsize,ysize) to each of your 2D plot commands, and the problem domain will be compressed to fit the square screen. (Use the correct dimensions for xorigin, etc). |
sivaranjini govindan (granjinig)
Member Username: granjinig
Post Number: 5 Registered: 04-2005
| Posted on Monday, May 09, 2005 - 11:18 pm: | |
thank you |
Mongi Mansouri (mongim_pde)
Member Username: mongim_pde
Post Number: 33 Registered: 11-2003
| Posted on Tuesday, May 10, 2005 - 06:36 pm: | |
Hey all... I have to do some post-processing on elevation data on two circular boundaries (call them B1 and B2) in a 2D model. I use ELEVATION(#Var) on "B1" EXPORT FORMAT "#d #1" FILE="FILE-NAME" However, the length of the exported data for boundaries B1, B2 are different. Question is: do u know how to export data on B1 and B2 (separately) such that the length of data is the same? I know there is such option when u use the FROM...TO modifier in FlexPDE and that 's to specify PRINT(n) or EXPORT(n), etc. But I cannot use this modifiers for circular boundaries. Any suggestion to this is appreciated. /MongiM |