Author |
Message |
RWS (transpower)
Member Username: transpower
Post Number: 7 Registered: 12-2008
| Posted on Thursday, January 22, 2009 - 09:38 pm: | |
I am particularly interested in plotting flux flow vs. potential. The sample program in the manual, fieldmap.pde, shows the orthogonal net, but only the lines of arg 1 are shown. The manual says: CONTOUR ( arg1, arg2 ) · Requests a two dimensional contour map of both arg1 and arg2, each with levels at independent uniform intervals. · The displayed level table pertains only to arg1, and contours of arg2 are not tagged. So: is there some work-around so that the contours of arg2 can be tagged? If not, could that be added to the "wish-list?" |
Marek Nelson (mgnelson)
Moderator Username: mgnelson
Post Number: 108 Registered: 07-2007
| Posted on Sunday, January 25, 2009 - 05:58 pm: | |
We can put this on the "wish-list".
|
RWS (transpower)
Member Username: transpower
Post Number: 8 Registered: 12-2008
| Posted on Monday, January 26, 2009 - 11:18 am: | |
OK, good. It would also be nice to have the option of putting the numerical values directly on the two contours of the plot, rather than labelling them with letters. |
|