Author |
Message |
Benjamin Kaplan (kaplan)
Member Username: kaplan
Post Number: 4 Registered: 08-2003
| Posted on Friday, September 26, 2003 - 11:01 am: | |
I want to export the mesh GRID to Tecplot. What instruction should I write? Thanks Ben. |
shohel mahmud (smahmud)
New member Username: smahmud
Post Number: 1 Registered: 09-2003
| Posted on Friday, September 26, 2003 - 12:38 pm: | |
Hi Ben You can use the command tecplot(variable1,variable2,variable3,etc.), it will create *.dat file that you can load by tecplot. If you tunr off the mesh in tecplot, you will not see the mesh and the boundary. You have to do one operation: go to Data-Extract-FE boundary and then click extract. One additional zone will be created that will show only the boundary. You can check from the plot attribute. now turn on the mesh in the main screne and go to plot attribute and selcet mesh-show no for all zones other than the newly created extracted zone. it will work fine now. shohel
|
Antonio Scofano (antonioscofano)
New member Username: antonioscofano
Post Number: 1 Registered: 07-2006
| Posted on Tuesday, July 04, 2006 - 05:53 am: | |
I want to import a mesh with quad8 element in tecplot.How I can do? Thank you in advance for your help |
Robert G. Nelson (rgnelson)
Moderator Username: rgnelson
Post Number: 646 Registered: 06-2003
| Posted on Thursday, July 06, 2006 - 03:27 pm: | |
Antonio - We are not experts in TecPlot. You should contact them directly. FlexPDE does not use quad8 elements.
|