Author |
Message |
Patricio A. Greco (pagreco)
Member Username: pagreco
Post Number: 31 Registered: 08-2003
| Posted on Thursday, July 01, 2004 - 04:39 pm: | |
I downloadad the version 4.0.7 and when I run the attached script , "incomplete bounding mesh" message appears , I would like to know why it happens with this new version. Thank You, Patricio |
Robert G. Nelson (rgnelson)
Moderator Username: rgnelson
Post Number: 173 Registered: 06-2003
| Posted on Friday, July 02, 2004 - 01:34 am: | |
For version 4.0.7 we wrote new code for identifying imbedded surface regions as bounding faces of 3D compartments. Unfortunately, this new code had a hole in the logic for circular shells, and you fell in the hole. I have corrected this error in version 4.0.7a, and after some more testing, I will post this version. You can work around the problem if you fully bound region 'F2' as follows: start(x0-D0/2,y0) arc(center=x0,y0) angle=360 line to(x0-D/2,y0) arc(center=x0,y0) angle=360 line to finish
|
Patricio A. Greco (pagreco)
Member Username: pagreco
Post Number: 32 Registered: 08-2003
| Posted on Friday, July 02, 2004 - 05:57 pm: | |
Sound like I had bad luck. |
Robert G. Nelson (rgnelson)
Moderator Username: rgnelson
Post Number: 177 Registered: 06-2003
| Posted on Monday, July 05, 2004 - 03:23 pm: | |
I have posted FlexPDE version 4.0.7a for Windows and Linux platforms on our website. This version corrects the error you experienced.
|
Patricio A. Greco (pagreco)
Member Username: pagreco
Post Number: 33 Registered: 08-2003
| Posted on Friday, July 16, 2004 - 09:17 am: | |
Thank you !! |