Author |
Message |
Patricio A. Greco (pagreco)
Member Username: pagreco
Post Number: 22 Registered: 08-2003
| Posted on Tuesday, April 13, 2004 - 05:27 pm: | |
Mr. Robert: I'm working with a couple of problems that have a long time for caclulation as long as my working hours. My question is if there are the possiblity to introduce in the program the capability to interrupt the calculation , save it and then resume. |
Robert G. Nelson (rgnelson)
Moderator Username: rgnelson
Post Number: 134 Registered: 06-2003
| Posted on Tuesday, April 13, 2004 - 10:19 pm: | |
Unfortunately, there is not. Is there a reason you cannot leave the machine running overnight? |
Patricio A. Greco (pagreco)
Member Username: pagreco
Post Number: 23 Registered: 08-2003
| Posted on Wednesday, April 14, 2004 - 08:43 am: | |
During the calculation , in many cases appears dialogs informing regarding meshing problems , If I don't close these dialog manually the proccess stops in the night.
|
Robert G. Nelson (rgnelson)
Moderator Username: rgnelson
Post Number: 136 Registered: 06-2003
| Posted on Wednesday, April 14, 2004 - 08:48 pm: | |
Well, in theory there shouldn't be any of those meshing problems.... Send me one of the offending descriptors, and I'll see if I can cure it. |