ELEVATION Plots in 2D YCYLINDER

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Kyle (kyle) Member Username: kyle Post Number: 16 Registered: 08-2006 Posted on Monday, January 29, 2007 - 08:28 pm:    Hi Robert: I am presently using FlexPDE Professional Version 5.0.12 2D in YCYLINDER Coordinates. I am finding some ELEVATION plotting errors that I do not remember seeing when using 2D Cartesian Coordinates. In particular, the axes for the plots seem to flip around, or, change plot quadrants, but not in a way that seems consistent to me. Sometimes I get plots going from r_zero to r_max (the correct orientation), and sometimes I get plots from r_max to r_zero (flipped). The same thing occurs in the z-axis. I tried re-defining the FEATURES used for the ELEVATION Plots to run either in the same or opposite direction as "Walking the Boundary" as a diagnostic test, but this didn't correct the problem. Have you see this problem before? Regards, Kyle   Robert G. Nelson (rgnelson) Moderator Username: rgnelson Post Number: 749 Registered: 06-2003 Posted on Tuesday, January 30, 2007 - 02:30 pm:    Send me an example, so I can see what you are talking about.