Author |
Message |
Sabine Blatt (sblatt)
Member Username: sblatt
Post Number: 9 Registered: 09-2005
| Posted on Monday, September 11, 2006 - 07:48 am: | |
Hi there is it possible to modify the appearance of the arrows in the vector plot? Say a different tip type, length, line thickness, etc. I would also like to set a min and max value to the color code of the vectors if that's possible. Thanks Sabine |
Robert G. Nelson (rgnelson)
Moderator Username: rgnelson
Post Number: 684 Registered: 06-2003
| Posted on Saturday, September 16, 2006 - 02:12 pm: | |
You can use the NOTIPS to remove the arrow heads, but you cannot adjust the tip type. You can adjust the line thickness on exports but not on the screen. Use the penwidth argument on the PNG or other auto-export commands, or the penwidth selector on the manual export dialog. Use the RANGE(a,b) qualifier on the plot command to force a minimum range (data values may extend the range). Use FIXED RANGE(a,b) to force an absolute range (data outside of range will be deleted). There is currently no explicit color control, but you can export the plot and recolor it with a pixel program like PaintshopPro.
|
|