Author |
Message |
Mahir Celik (mahir)
New member Username: mahir
Post Number: 1 Registered: 06-2003
| Posted on Tuesday, July 01, 2003 - 05:44 am: | |
Hello, i want to plot the electrical potential distrubition depending on Frequency. Thats way i have defined an alternating current I=I0*sin(2*pi*f*t+alpha) but i have to change f for each simulation. Is there any other convenient Methods to create Plots according to the different frequencies in the simulation? Thanks for your help Mahir |
Robert G. Nelson (rgnelson)
New member Username: rgnelson
Post Number: 3 Registered: 06-2003
| Posted on Tuesday, July 01, 2003 - 02:39 pm: | |
You can make f a "Staged" parameter. Specify in the definitions section: f = staged(f1,f2,f3) with as many values "fn" as you want. Then plot a history of anything you want to see plotted vs frequency. (The plot will have axis labels corresponding to stage number, not frequency.) See the Help index under "Staged" and "Stages". |
Mahir Celik (mahir)
New member Username: mahir
Post Number: 2 Registered: 06-2003
| Posted on Wednesday, July 02, 2003 - 04:53 am: | |
Thank you Mr. Nelson
|