Eduardo Ghershman (edug)
Member Username: edug
Post Number: 6 Registered: 08-2005
| Posted on Wednesday, September 21, 2005 - 12:45 pm: | |
Considered Mr. Nelson. In its example resistor.pde ,the cross section is constant,by what means flexpde computes the problem when the cross section is not constant? For example in this case,the is aluminium with a resistivy {rho=2.63x10^-8 ohm.m/2m=1.315 x 10^-8 ohm/m}the z thickness was incorporated into the resistivity number,z=2m. the program is correct? My work is to make resistance,like the indicated one in the following drawing the problem is to transfer the coordinates of the lines to FlexPDE, I believe that it is the same problem that appears in any other field of engineering, it is possible to scan the image of the resistance,and to transfer it to FlexPDE?,in order to make agile(FAST TRACK ) the work. Thanks in advance, Eduardo Ghershman
|