Author |
Message |
Nagarajan Thiyagarajan (tnagarajan)
Member Username: tnagarajan
Post Number: 5 Registered: 04-2005
| Posted on Tuesday, July 05, 2005 - 04:11 pm: | |
Hi, I am modeling a 3D problem which has got a fillet. The mesh is distorted near the fillet and therefore the fillet is not smooth. I tried to increase the mesh density but that does not seem to solve my problem. However, the model is working fine in 2D. Any suggestions? Thanks, Nagarajan |
Robert G. Nelson (rgnelson)
Moderator Username: rgnelson
Post Number: 396 Registered: 06-2003
| Posted on Wednesday, July 06, 2005 - 01:11 pm: | |
Thank you for bringing this to our attention. Yes, there appears to be something amiss in the extrusion of fillets to 3D. I will fix it in the next maintenance release. In the meantime, you can work around the problem by replacing the fillet with an explicit ARC.
|
|