Author |
Message |
shohel mahmud (shohel_mahmud)
New member Username: shohel_mahmud
Post Number: 2 Registered: 06-2005
| Posted on Monday, June 20, 2005 - 08:00 am: | |
Dear Dr. Nelson There may be a possible bug during the calculation using STAGES or STAGED() command. Run the sample problem "stage_geom.pde" in samples>Misc. Also run the modified programme "stage_geom1.pde" attached with this mail. Both of them run for all stages but the final results are unchanged after stage 1 (see the result file u_value.txt). Another minor problem: when I use the "save as" command, the new file is created without the .pde extension. |
Patricio A. Greco (pagreco)
Junior Member Username: pagreco
Post Number: 3 Registered: 12-2004
| Posted on Monday, June 20, 2005 - 05:35 pm: | |
Dr. Nelson The example/misc/STAGE_GEOM.PDE script runs in V4 and fails in V5. The domain are allways the same of stage 1. Thank you , Patricio |
Robert G. Nelson (rgnelson)
Moderator Username: rgnelson
Post Number: 385 Registered: 06-2003
| Posted on Monday, June 20, 2005 - 10:32 pm: | |
Thank you both for pointing out this error. I will fix it in the next maintenance release. The failure is in the automatic detection of grid modifications in the stages. It will work correctly if you use SELECT STAGEGRID
|